克利夫兰开口杯法闪点试验仪

型号：

aco-8

产地：

日本

CODE	PART NAME	REMARKS
ACO-00-023	aco-8	Cleveland open Cup Flash Point Tester 克利夫兰开口杯法闪点试验仪
ACO-00-023	aco-8as	Cleveland open Cup Flash Point Tester, asphalt version克利夫兰开口杯法闪点试验仪,沥青试验用

标准附件
 

CODE	PART NAME	Qty	REMARKS
ACO-02-001	Test Cup Assembly油杯	1
320-00-035	Thermofuse 热熔丝	1	Pack of 5, with Insulating Tube.5只装，带绝缘管
	Gas Hose 9 x 16, 1.5m with Hose bands带夹箍煤气管	1
ACO-04-401	Heating Plate, Upper加热板	1
MPC-02-033	AC Power Cord 电源线	1	2.5m, For 220 to 240V
	aco-8 Manuals 操作手册	1	Manuals for aco-8
ACO-02-441	Skimmer Paddle除沫片	3	asphalt version only沥青试验专用

选购件

CODE	PART NAME	REMARKS
070-00-068	Printer, BS2-80TS 打印机	Prints out test data and instrument settings. 打印试验、设定数据
070-00-281	Mini USB Keyboard 迷你键盘	Sample ID entering 样品名输入
ACO-05-016	Mercury Thermometer Holder 水银温度计夹座	For Calibration 校准用

 
 
2年备件选购

CODE	PART NAME	Qty	CODE	PART NAME	Qty
ACO-02-001	Test Cup Assembly 油杯	1	ACO-02-402	Inner Detector Ring 闪点检测器内环	1
320-00-035	Thermofuse 热熔丝	1	ACO-02-403	Outer Detector Ring 闪点检测器外环	1
ACO-05-021	Igniter Top for aco-8 点火头	2	190-00-216	Insulating Collar for aco-8	2
ACO-05-011	Temperature Sensor for aco-8 温度传感器	1	100-00-011	Heater Coil, 220/240V 800W (for 220/240V model) 加热丝	1
ACO-02-441	Skimmer Paddle (for aco-8as only) 除沫片（沥青试验专用）	5

仪器特点
1.SINGLE ACTION SETTING 单一动作设定
The flash detector rings and the temperature sensor are permanently mounted on a swing-arm assembly, which allows an easy setting of the specimen闪点检测环和温度传感器一起组装在测试摇臂上，加样便捷
2. EASY OPERATION 操作简单
Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to do other lab work. The instrument follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module.只需选好试验模式，输入预期闪点，仪器就严格按照标准自动进行测试，实验结束蜂鸣报警，显示试验结果。
3. AUTO FIRE POINT DETECTION  自动燃点检测
In addition to the flash point, fire point can be determined automatically. The fire point is detected when the double Ionization rings detects 5 sec of continuous burning
 除闪点外，燃点也能自动检测。样品持续燃烧5秒，燃点确定。
4. AUTO FIRE ConTAINMENT 自动灭火
The fire containment lid activates automatically to help putting out fire when aco-8 detects a fire point or specimen is burning up heavily.
仪器检测到燃点或样品起火，灭火装置动作，扑灭试验火焰
5. DATA HANDLING 数据处理
The unit is equipped to store up to 200 test results and export to an optional printer or to a LIMS through an RS-232 port or USB memory.
试验结果可以保存200个，试验结果可以选购打印机打印，也可以通过USB, RS-232将数据导出到LIMS。
6. USB PORT  USB接口
A USB port allows connecting USB keyboard for easy entering sample name and connecting USB flash memory for data copy to a PC or test conditions/parameters copy to the tester.
USB接口可以接USB键盘（选购件）用于样品名称的输入，也可以接闪存copy试验参数
6.PASSWORD PROTECTION  密码保护
With setting up password by the administrator, the device is protected against inadvertent change of parameters by the operator.
试验程序有密码保护功能，可以防止误操作
7. ALL-IN ONE DESIGN IN LIGHTWEIGHT 轻盈的一体式设计
The all-in-one design is much lighter than old model, ACO-7 by approximately 30%, which is world's smallest class in volume.
比ACO-7轻30%左右，也是全球体积最小的克利夫兰开口杯法闪点试验仪。
规格

TYPE 机型	All –in one, microprocessor controlled 一体式设计，微处理器控制
TEST STANDARDS 试验标准	ISO 2592, ASTM D92, IP36
MEASURING RANGE测试范围	Ambient to 400℃
MEASUREMENT MODES 测试模式	ISO CRM, ISO Normal, ISO SPE, ISO Flash & Fire, ISO Skim*, ASTM Normal, ASTM SPE, ASTM Flash & Fire, ASTM Skim*, and User custom *: asphalt version only
HEATER 加热部	Nichrome Coil heater: 800W@220V 镍铬铁加热丝
COOLING DEVICE 冷却装置	Forced air cooling by sirocco fan 强制风冷
DISPLAY 显示	5.7 inch (117 x 88mm) color LCD with LED back light 彩色液晶显示
TEMPERATURE SENSOR温度传感器	PT-100 in stainless steel sheath 带不锈钢套的PT-100
FLASH DETECTOR 闪点检测器	Double Ionization Rings双环形电极(火焰离子检测)
IGNITION SOURCE点火源	Gas ignition with automatic lighting 气点火
BAROMETRIC CORRECTION 大气压修正	Automatic correction by built-in barometric pressure sensor 通过内置的压力传感器自动补正
I/O PORT 接口	RS-232C = 1 channel (for PC or Optional Printer) USB=1 channel (for USB keyboard or USB Flash Memory)
SAFETY SHUTDOWN 安全设置	Automatically shuts off and the problem is reported by buzzer and display, in case: 以下情况仪器停止运行，同时蜂鸣报警，屏幕显示 (a) EFP+30 oC or 400 oC is reached, 高于预设闪点20℃以上或超过370℃时 (b) temperature sensor is found defective, 温度传感器故障 (c) flash detector is found defective,闪点检测传感器故障 (d) thermofuse is blown (also fire containment lid activates),热熔丝断开 (e) built-in battery is found drained out,内置电池电能耗尽 (f) arm is not set in place, 检测臂未到位 (g)control computer runs away (no display) 微机失控
GAS SUPPLY 气源	LP gas or natural gas (Max. pressure:10kPa) 液化气或天然气（不超过10kpa）
POWER SUPPLY 电源	220/240 VAC, 50/60Hz
POWER ConSUMPTION 功率	最大1000W
ELECTRICITY ConSUMPTION 能耗	160Wh for 1 test (about 20 min), 60.48gCO2 (@ 0.378kgCO2/1kWh)
AMBIENT TEMP. RANGE环境温度	10°C to 35°C
DIMENSIONS & WEIGHT 外形尺寸	230mm (W) × 470mm (D) × 390mm (H) 16kg

 

注：该仪器未取得中华人民共和国医疗器械注册证，不可用于临床诊断或治疗等相关用途